Foaming material produced on the base of inorganic polymer is icon

Foaming material produced on the base of inorganic polymer is




НазваFoaming material produced on the base of inorganic polymer is
Дата24.06.2012
Розмір6.71 Kb.
ТипДокументи






The application of efficient heat-insulated materials provides decreasing heat losses into the atmosphere, the problem of saving power resources being solved to a certain extent.

Among polymeric materials the foaming materials have higher heat-insulated properties. But the largest part of them is applied within the temperature range from 100-150 єC.





Foaming material produced on the base of inorganic polymer is:

  • Non – toxic;

  • Can be applied within the temperature range to 600 єC;

  • Its density – 328 kg/m3;

  • Heat conductivity – 0,0353 wt/mk;

  • Breaking at the bending stress – 0,465 mPa;

  • Bursting at 10% compressive stress – 0,331 MPa.





Block-shaped heat-insulated material is produced on the base of grain foamed granules and binder.

The material can be applied as an efficient heat-insulated material for dwelling and industrial constructions, industrial equipment and pipelines, large capacity transport.



East-Ukrainian Volodymyr Dahl National University

Мolodizhny bl., 20a, Luhansk, Ukraine, 91034,

tel./fax +380 (642) 41-84-07, e-mail onti@snu.edu.ua

Схожі:

Foaming material produced on the base of inorganic polymer is iconFoaming material produced on the base of inorganic polymer is

Foaming material produced on the base of inorganic polymer is iconClose box cuInSe2 film deposition technology
С that additionally enhances energy consumption of the technological process. Therefore it is necessary to use low material consumption...
Foaming material produced on the base of inorganic polymer is iconMaterial balance. Formula. Parameters of material balance. Sections of industrial regulations

Foaming material produced on the base of inorganic polymer is iconInorganic chemistry 1

Foaming material produced on the base of inorganic polymer is iconClasses and nomenclature of inorganic compounds

Foaming material produced on the base of inorganic polymer is iconSyllabus subject: general and inorganic chemistry

Foaming material produced on the base of inorganic polymer is iconNormative-base

Foaming material produced on the base of inorganic polymer is iconДокументи
1. /material/КРОК 3 база новая 05-07/КРОК 3 база новая/2005-2006_1/2005-2006_1/TEST_E~1.RTF
Foaming material produced on the base of inorganic polymer is iconДокументи
1. /material/КРОК 3 база новая 05-07/КРОК 3 база новая/2005-2006_1/2005-2006_1/TEST_E~1.RTF
Foaming material produced on the base of inorganic polymer is iconMaterial stimylirov kaches tryda

Додайте кнопку на своєму сайті:
Документи


База даних захищена авторським правом ©zavantag.com 2000-2013
При копіюванні матеріалу обов'язкове зазначення активного посилання відкритою для індексації.
звернутися до адміністрації
Документи